Envoy Router

The Envoy and Envoy 1U are low-cost routers that provide a lightweight aluminum chassis, 266 MHz CPU, 128 MB RAM, two on-board 10/100 ethernet ports, two Mini PCI slots, one USB bus with two internal ports, flash storage, and no cooling fans. Both Envoy chassis are designed for low-cost, small form-factor CPE installations with operating temperatures from 0° to 55° C. The extended temperature version can be deployed in outdoor enclosures with operating temperatures from –10° to 65° C, and options for 24 VDC and –48 VDC power are also available.

The Envoy is a set-top chassis that supports one DB-style and two RJ-style expansion ports, while the Envoy 1U is a rackmount chassis that supports two DB-style and three RJ-style expansion ports. Expansion options currently include network cards for 10/100 ethernet, T1/E1, and synchronous serial (RS232, RS422, X.21 and V.35). In the future, the Envoy will also support 56K dial-up, FXO/FXS voice interfaces, and all high-speed encryption co-processor for VPN acceleration.
 

Envoy & Envoy 1U Routers
Envoy & Envoy 1U

Downloads
Envoy Data Sheet
Envoy 1U Data Sheet

Replacement Guide
Cisco 1700 series
Cisco 1800 series

Envoy routers take advantage of the ImageStream Linux router distribution, which provides support for NAT firewall security, IPsec and SSL virtual private networks (VPNs), quality of service (QoS), VLAN tagging, VRRP for LAN failover, dynamic routing, packet filtering, bridging, peer-to-peer traffic control, and more. ImageStream Linux also includes the Inetics driver component architecture (IDCA), which supports WAN protocols including PPP, Cisco HDLC and frame relay, as well as most multilink protocols including MLPPP, MLFR and CEF.

Both the Envoy and Envoy 1U use the same system board and CPU, and both are capable of routing two T1s or E1s at wire speed.* Depending on packet size and processing requirements, ethernet throughput for these routers can exceed 50 Mbps full duplex. Despite their exceptional price-performance, Envoy routers are not recommended for pure VoIP networks, some gaming networks, and other applications that produce high concentrations of small packets. Networks with high concentrations of small packets may require a faster router like the TransPort or above.

The Envoy and Envoy 1U are designed to handle common ISP and business-class network applications. The routers' advanced capabilities make them ideal for small-scale routing at branch offices and remote POPs. The Envoy and Envoy 1U provide guaranteed wire-speed performance* and unwavering reliability in a compact size and price. Both chassis can be used to replace Cisco 1700 and 1800 routers, and they are excellent choices for QoS and small-scale VPN applications that require wire-speed performance in an integrated package with CALEA intercept support.

Hardware

Processor: 266 MHz AMD SC1100
Memory: 128 MB SDRAM
Storage: Compact flash
Network Ports: Two 10/100 ethernet
Management Port: Serial console
Expansion Interfaces
   Two Mini PCI Type III slots
   One USB 1.1 bus with two ports
Wire-Speed Performance*
   Two T1s or E1s
Power Supply
   Design: External AC/DC power supply
   AC Mains Voltage: 100 to 240 VAC
   AC Mains Frequency: 47 to 63 Hz
   Chassis Mains Voltage: 5 VDC at 2.5A
Dimensions
Envoy
   Height: 1.75 inches (4.4 cm)
   Width: 6.25 inches (15.9 cm)
   Depth: 6.25 inches (15.9 cm)
Envoy 1U
   Height: 1.75 inches (4.4 cm)
   Width: 19 inches (48.3 cm)
   Depth: 7.25 inches (18.4 cm)
Weight
   Envoy: 1.2 lbs. (0.5 kg)
   Envoy 1U: 1.3 lbs. (0.6 kg)
Environmental Requirements
   Humidity: 0% to 90% (non-condensing)
   Operating temperature: 0 to 55 °C
   Extended temperature: –10 to 65 °C
   Storage temperature: –20 to 75 °C
 

Options

LAN Card
   1-port 10/100 ethernet
WAN Cards
   1-port T1/E1
   1-port sync serial
Model Numbers
   EV1000 - Base Envoy router
   EV1000-SE - Envoy + 1 sync serial
   EV1000-TE - Envoy + 1 T1/E1
   EV1000-2TE - Envoy + 2 T1/E1

   EV1000-1U - Base Envoy 1U router
   EV1000-SE-1U - Envoy 1U + 1 serial
   EV1000-2SE-1U - Envoy 1U + 2 serial
   EV1000-TE-1U - Envoy 1U + 1 T1/E1
   EV1000-2TE-1U - Envoy 1U + 2 T1/E1

   USB 441-SE - Sync serial card
   USB 441-TE - T1/E1 card
   PS-EV-24 - +24 VDC power supply
   PS-EV-48 - –48 VDC power supply
   EV-EXT - Extended temperature option
 
* Please refer to the  wire-speed performance note for more information on this specification.
Note: Terms and specifications are subject to change without notice.
 

 Copyright © 2008 ImageStream Internet Solutions, Inc. All rights reserved. Legal Notices | Privacy Policy